al Steel En8 (C35) 103 olerance 0.1/300mm tness 0.3/300mm 134 70 55 52 50 20 38 15 30 = = M8 x 16 Ø6.8 THRU M4 x 6 5 C D 6 7 8 A B 541-132-923 WEIGHT: A3 SHEET 1 OF 1 SCALE:1:20 DWG NO. TITLE: REVISION DO NOT SCALE DRAWING MATERIAL: DATE SIGNATURE NAME DEBUR AND BREAK SHARP EDGES FINISH: UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: Q.A MFG APPV'D CHK'D DRAWN bove with 1 rack and shaft option 3 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 573 Max. Input Torque (Nm) 8 Max. Capacity (kg) 80 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 3.5 Module 1 Tooth Quality 8 h27 Pinion No of Teeth 20 Standard Rack No of Teeth** 923 Theor. Rack Length (mm)** 2900 Shaft Option Description 1 DIN ISO 14 Spline bore input 6 x 11 x 14 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø10mm h7 3x3 P9 keyway 01827 253390 wmh-trans.co.uk * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) C D A B C D 8 A B 209 TEL: 01827 288122 sales@wmh-trans.co.uk FAX: 01827 253390 www.wmh-trans.co.uk Left Hand Right Hand Tr d x p d2 min d2 max d3 min L Part No. Part No. 12 x 3 10.191 10.415 7.8 1000 505-012-010 500-012-010 12 x 3 10.191 10.415 7.8 2000 505-012-020 500-012-020 12 x 3 10.191 10.415 7.8 3000 505-012-030 500-012-030 14 x 3 12.191 12.415 9.8 1000 505-014-010 500-014-010 14 x 3 12.191 12.415 9.8 2000 505-014-020 500-014-020 14 x 3 12.191 12.415 9.8 3000 505-014-030 500-014-030 16 x 4 13.64 13.905 10.8 1000 505-016-010 500-016-010 16 x 4 13.64 13.905 10.8 2000 505-016-020 500-016-020 16 x 4 13.64 13.905 10.8 3000 505-016-030 500-016-030 18 x 4 15.64 15.905 12.8 1000 505-018-010 500-018-010 18 x 4 15.64 15.905 12.8 2000 505-018-020 500-018-020 18 x 4 15.64 15.905 12.8 3000 505-018-030 500-018-030 20 x 4 17,640 17,905 14,8 1000 505-020-010 500-020-010 20 x 4 17,640 17,905 14,8 2000 505-020-020 500-020-020 20 x 4 17,640 17,905 14,8 3000 505-020-030 500-020-030 22 x 5 19,114 19,394 15,5 1000 505-022-010 500-022-010 22 x 5 19,114 19,394 15,5 2000 505-022-020 500-022-020 22 x 5 19,114 19,394 15,5 3000 505-022-030 500-022-030 24 x 5 21,094 21,394 17,5 1000 505-024-010 500-024-010 24 x 5 21,094 21,394 17,5 2000 505-024-020 500-024-020 24 x 5 21,094 21,394 17,5 3000 505-024-030 500-024-030 26 x 5 23,094 23,394 19,5 1000 505-026-010 500-026-010 26 x 5 23,094 23,394 19,5 2000 505-026-020 500-026-020 26 x 5 23,094 23,394 19,5 3000 505-026-030 500-026-030 28 x 5 25,094 25,394 21,5 1000 505-028-010 500-028-010 28 x 5 25,094 25,394 21,5 2000 505-028-020 500-028-020 28 x 5 25,094 25,394 21,5 3000 505-028-030 500-028-030 30 x 6 26,547 26,882 21,9 1000 505-030-010 500-030-010 30 x 6 26,547 26,882 21,9 2000 505-030-020 500-030-020 30 x 6 26,547 26,882 21,9 3000 505-030-030 500-030-030 32 x 6 28,547 28,882 23,9 1000 505-032-010 500-032-010 32 x 6 28,547 28,882 23,9 2000 505-032-020 500-032-020 32 x 6 28,547 28,882 23,9 3000 505-032-030 500-032-030 36 x 6 32,547 32,882 27,9 1000 505-036-010 500-036-010 36 x 6 32,547 32,882 27,9 2000 505-036-020 500-036-020 36 x 6 32,547 32,882 27,9 3000 505-036-030 500-036-030 40 x 7 36,020 36,375 30,5 1000 505-040-010 500-040-010 40 x 7 36,020 36,375 30,5 2000 505-040-020 500-040-020 40 x 7 36,020 36,375 30,5 3000 505-040-030 500-040-030 44 x 7 40,020 40,375 34,5 1000 505-044-010 500-044-010 44 x 7 40,020 40,375 34,5 2000 505-044-020 500-044-020 44 x 7 40,020 40,375 34,5 3000 505-044-020 500-044-030 48 x 8 43,468 43,868 37,8 1000 505-048-010 500-048-010 48 x 8 43,468 43,868 37,8 2000 505-048-020 500-048-020 48 x 8 43,468 43,868 37,8 3000 505-048-030 500-048-030 50 x 8 45,468 45,868 39,3 1000 505-050-010 500-050-010 50 x 8 45,468 45,868 39,3 2000 505-050-020 500-050-020 50 x 8 45,468 45,868 39,3 3000 505-050-030 500-050-030 leadscrew Commercial Range Rolled Finish Material Steel Quality En8 (C35) DIN 103 Lead Tolerance 0.1/300mm Straightness 0.3/300mm 4. 1 72 T: 01827 310311 • F: 01827 307118 E: sales@wmh-trans.co.uk • www.wmh-trans.co.uk Left Hand Right Hand Tr d x p d2 min d2 max d3 min L Part No. Part No. 12 x 3 10.191 10.415 7.8 1000 505-012-010 500-012-010 12 x 3 10.191 10.415 7.8 2000 505-012-020 500-012-020 12 x 3 10.191 10.415 7.8 3000 505-012-030 500-012-030 14 x 3 12.191 12.415 9.8 1000 505-014-010 500-014-010 14 x 3 12.191 12.415 9.8 2000 505-014-020 500-014-020 14 x 3 12.191 12.415 9.8 3000 505-014-030 500-014-030 16 x 4 13.64 13.905 10.8 1000 505-016-010 500-016-010 16 x 4 13.64 13.905 10.8 2000 505-016-020 500-016-020 16 x 4 13.64 13.905 10.8 3000 505-016-030 500-016-030 18 x 4 15.64 15.905 12.8 1000 505-018-010 500-018-010 18 x 4 15.64 15.905 12.8 2000 505-018-020 500-018-020 18 x 4 15.64 15.905 12.8 3000 505-018-030 500-018-030 20 x 4 17,640 17,905 14,8 1000 505-020-010 500-020-010 20 x 4 17,640 17,905 14,8 2000 505-020-020 500-020-020 20 x 4 17,640 17,905 14,8 3000 505-020-030 500-020-030 22 x 5 19,114 19,394 15,5 1000 505-022-010 500-022-010 22 x 5 19,114 19,394 15,5 2000 505-022-020 500-022-020 22 x 5 19,114 19,394 15,5 3000 505-022-030 500-022-030 24 x 5 21,094 21,394 17,5 1000 505-024-010 500-024-010 24 x 5 21,094 21,394 17,5 2000 505-024-020 500-024-020 24 x 5 21,094 21,394 17,5 3000 505-024-030 500-024-030 26 x 5 23,094 23,394 19,5 1000 505-026-010 500-026-010 26 x 5 23,094 23,394 19,5 2000 505-026-020 500-026-020 26 x 5 23,094 23,394 19,5 3000 505-026-030 500-026-030 28 x 5 25,094 25,394 21,5 1000 505-028-010 500-028-010 28 x 5 25,094 25,394 21,5 2000 505-028-020 500-028-020 28 x 5 25,094 25,394 21,5 3000 505-028-030 500-028-030 30 x 6 26,547 26,882 21,9 1000 505-030-010 500-030-010 30 x 6 26,547 26,882 21,9 2000 505-030-020 500-030-020 30 x 6 26,547 26,882 21,9 3000 505-030-030 500-030-030 32 x 6 28,547 28,882 23,9 1000 505-032-010 500-032-010 32 x 6 28,547 28,882 23,9 2000 505-032-020 500-032-020 32 x 6 28,547 28,882 23,9 3000 505-032-030 500-032-030 36 x 6 32,547 32,882 27,9 1000 505-036-010 500-036-010 36 x 6 32,547 32,882 27,9 2000 505-036-020 500-036-020 36 x 6 32,547 32,882 27,9 3000 505-036-030 500-036-030 40 x 7 36,020 36,375 30,5 1000 505-040-010 500-040-010 40 x 7 36,020 36,375 30,5 2000 505-040-020 500-040-020 40 x 7 36,020 36,375 30,5 3000 505-040-030 500-040-030 44 x 7 40,020 40,375 34,5 1000 505-044-010 500-044-010 44 x 7 40,020 40,375 34,5 2000 505-044-020 500-044-020 44 x 7 40,020 40,375 34,5 3000 505-044-020 500-044-030 48 x 8 43,468 43,868 37,8 1000 505-048-010 500-048-010 48 x 8 43,468 43,868 37,8 2000 505-048-020 500-048-020 48 x 8 43,468 43,868 37,8 3000 505-048-030 500-048-030 50 x 8 45,468 45,868 39,3 1000 505-050-010 500-050-010 50 x 8 45,468 45,868 39,3 2000 505-050-020 500-050-020 50 x 8 45,468 45,868 39,3 3000 505-050-030 500-050-030 leadscrew Commercial Range led Finish Material Steel Quality En8 (C35) DIN 103 Lead Tolerance 0.1/300mm Straightness 0.3/300mm . 1 2 T: 01827 310311 • F: 01827 307118 E: sales@wmh-trans.co.uk • www.wmh-trans.co.uk Left Hand Right Hand Tr d x p d2 min d2 max d3 min L Part No. Part No. 12 x 3 10.191 10.415 7.8 1000 505-012-010 500-012-010 12 x 3 10.191 10.415 7.8 2000 505-012-020 500-012-020 12 x 3 10.191 10.415 7.8 3000 505-012-030 500-012-030 14 x 3 12.191 12.415 9.8 1000 505-014-010 500-014-010 14 x 3 12.191 12.415 9.8 2000 505-014-020 500-014-020 14 x 3 12.191 12.415 9.8 3000 505-014-030 500-014-030 16 x 4 13.64 13.905 10.8 1000 505-016-010 500-016-010 16 x 4 13.64 13.905 10.8 2000 505-016-020 500-016-020 16 x 4 13.64 13.905 10.8 3000 505-016-030 500-016-030 18 x 4 15.64 15.905 12.8 1000 505-018-010 500-018-010 18 x 4 15.64 15.905 12.8 2000 505-018-020 500-018-020 18 x 4 15.64 15.905 12.8 3000 505-018-030 500-018-030 20 x 4 17,640 17,905 14,8 1000 505-020-010 500-020-010 20 x 4 17,640 17,905 14,8 2000 505-020-020 500-020-020 20 x 4 17,640 17,905 14,8 3000 505-020-030 500-020-030 22 x 5 19,114 19,394 15,5 1000 505-022-010 500-022-010 22 x 5 19,114 19,394 15,5 2000 505-022-020 500-022-020 22 x 5 19,114 19,394 15,5 3000 505-022-030 500-022-030 24 x 5 21,094 21,394 17,5 1000 505-024-010 500-024-010 24 x 5 21,094 21,394 17,5 2000 505-024-020 500-024-020 24 x 5 21,094 21,394 17,5 3000 505-024-030 500-024-030 26 x 5 23,094 23,394 19,5 1000 505-026-010 500-026-010 26 x 5 23,094 23,394 19,5 2000 505-026-020 500-026-020 26 x 5 23,094 23,394 19,5 3000 505-026-030 500-026-030 28 x 5 25,094 25,394 21,5 1000 505-028-010 500-028-010 28 x 5 25,094 25,394 21,5 2000 505-028-020 500-028-020 28 x 5 25,094 25,394 21,5 3000 505-028-030 500-028-030 30 x 6 26,547 26,882 21,9 1000 505-030-010 500-030-010 30 x 6 26,547 26,882 21,9 2000 505-030-020 500-030-020 30 x 6 26,547 26,882 21,9 3000 505-030-030 500-030-030 32 x 6 28,547 28,882 23,9 1000 505-032-010 500-032-010 32 x 6 28,547 28,882 23,9 2000 505-032-020 500-032-020 32 x 6 28,547 28,882 23,9 3000 505-032-030 500-032-030 36 x 6 32,547 32,882 27,9 1000 505-036-010 500-036-010 36 x 6 32,547 32,882 27,9 2000 505-036-020 500-036-020 36 x 6 32,547 32,882 27,9 3000 505-036-030 500-036-030 40 x 7 36,020 36,375 30,5 1000 505-040-010 500-040-010 40 x 7 36,020 36,375 30,5 2000 505-040-020 500-040-020 40 x 7 36,020 36,375 30,5 3000 505-040-030 500-040-030 44 x 7 40,020 40,375 34,5 1000 505-044-010 500-044-010 44 x 7 40,020 40,375 34,5 2000 505-044-020 500-044-020 44 x 7 40,020 40,375 34,5 3000 505-044-020 500-044-030 48 x 8 43,468 43,868 37,8 1000 505-048-010 500-048-010 48 x 8 43,468 43,868 37,8 2000 505-048-020 500-048-020 48 x 8 43,468 43,868 37,8 3000 505-048-030 500-048-030 50 x 8 45,468 45,868 39,3 1000 505-050-010 500-050-010 50 x 8 45,468 45,868 39,3 2000 505-050-020 500-050-020 50 x 8 45,468 45,868 39,3 3000 505-050-030 500-050-030 leadscrew Commercial Range Rolled Finish Materia Quality DIN Lead To Straight 4. 1 72 T: 01827 310311 • F: 01827 307118 E: sales@wmh-trans.co.uk • www.wmh-trans.co.uk Left Hand Right Hand Tr d x p d2 min d2 max d3 min L Part No. Part No. 12 x 3 10.191 10.415 7.8 1000 505-012-010 500-012-010 12 x 3 10.191 10.415 7.8 2000 505-012-020 500-012-020 12 x 3 10.191 10.415 7.8 3000 505-012-030 500-012-030 14 x 3 12.191 12.415 9.8 1000 505-014-010 500-014-010 14 x 3 12.191 12.415 9.8 2000 505-014-020 500-014-020 14 x 3 12.191 12.415 9.8 3000 505-014-030 500-014-030 16 x 4 13.64 13.905 10.8 1000 505-016-010 500-016-010 16 x 4 13.64 13.905 10.8 2000 505-016-020 500-016-020 16 x 4 13.64 13.905 10.8 3000 505-016-030 500-016-030 18 x 4 15.64 15.905 12.8 1000 505-018-010 500-018-010 18 x 4 15.64 15.905 12.8 2000 505-018-020 500-018-020 18 x 4 15.64 15.905 12.8 3000 505-018-030 500-018-030 20 x 4 17,640 17,905 14,8 1000 505-020-010 500-020-010 20 x 4 17,640 17,905 14,8 2000 505-020-020 500-020-020 20 x 4 17,640 17,905 14,8 3000 505-020-030 500-020-030 22 x 5 19,114 19,394 15,5 1000 505-022-010 500-022-010 22 x 5 19,114 19,394 15,5 2000 505-022-020 500-022-020 22 x 5 19,114 19,394 15,5 3000 505-022-030 500-022-030 24 x 5 21,094 21,394 17,5 1000 505-024-010 500-024-010 24 x 5 21,094 21,394 17,5 2000 505-024-020 500-024-020 24 x 5 21,094 21,394 17,5 3000 505-024-030 500-024-030 26 x 5 23,094 23,394 19,5 1000 505-026-010 500-026-010 26 x 5 23,094 23,394 19,5 2000 505-026-020 500-026-020 26 x 5 23,094 23,394 19,5 3000 505-026-030 500-026-030 28 x 5 25,094 25,394 21,5 1000 505-028-010 500-028-010 28 x 5 25,094 25,394 21,5 2000 505-028-020 500-028-020 28 x 5 25,094 25,394 21,5 3000 505-028-030 500-028-030 30 x 6 26,547 26,882 21,9 1000 505-030-010 500-030-010 30 x 6 26,547 26,882 21,9 2000 505-030-020 500-030-020 30 x 6 26,547 26,882 21,9 3000 505-030-030 500-030-030 32 x 6 28,547 28,882 23,9 1000 505-032-010 500-032-010 32 x 6 28,547 28,882 23,9 2000 505-032-020 500-032-020 32 x 6 28,547 28,882 23,9 3000 505-032-030 500-032-030 36 x 6 32,547 32,882 27,9 1000 505-036-010 500-036-010 36 x 6 32,547 32,882 27,9 2000 505-036-020 500-036-020 36 x 6 32,547 32,882 27,9 3000 505-036-030 500-036-030 40 x 7 36,020 36,375 30,5 1000 505-040-010 500-040-010 40 x 7 36,020 36,375 30,5 2000 505-040-020 500-040-020 40 x 7 36,020 36,375 30,5 3000 505-040-030 500-040-030 44 x 7 40,020 40,375 34,5 1000 505-044-010 500-044-010 44 x 7 40,020 40,375 34,5 2000 505-044-020 500-044-020 44 x 7 40,020 40,375 34,5 3000 505-044-020 500-044-030 48 x 8 43,468 43,868 37,8 1000 505-048-010 500-048-010 48 x 8 43,468 43,868 37,8 2000 505-048-020 500-048-020 48 x 8 43,468 43,868 37,8 3000 505-048-030 500-048-030 50 x 8 45,468 45,868 39,3 1000 505-050-010 500-050-010 50 x 8 45,468 45,868 39,3 2000 505-050-020 500-050-020 50 x 8 45,468 45,868 39,3 3000 505-050-030 500-050-030 leadscrew Commercial Range Rolled Finish Material Steel Quality En8 (C35) DIN 103 Lead Tolerance 0.1/300mm Straightness 0.3/300mm 4. 1 72 T: 01827 310311 • F: 01827 307118 E: sales@wmh-trans.co.uk • www.wmh-trans.co.uk Right Hand Part No. 500-012-010 500-012-020 500-012-030 500-014-010 500-014-020 500-014-030 500-016-010 500-016-020 500-016-030 500-018-010 500-018-020 500-018-030 500-020-010 500-020-020 500-020-030 500-022-010 500-022-020 500-022-030 500-024-010 500-024-020 500-024-030 500-026-010 500-026-020 500-026-030 500-028-010 500-028-020 500-028-030 500-030-010 500-030-020 500-030-030 500-032-010 500-032-020 500-032-030 500-036-010 500-036-020 500-036-030 500-040-010 500-040-020 500-040-030 500-044-010 500-044-020 500-044-030 500-048-010 500-048-020 500-048-030 500-050-010 500-050-020 500-050-030 Material Steel Quality En8 (C35) DIN 103 Lead Tolerance 0.1/300mm Straightness 0.3/300mm ans.co.uk Left Hand Right Hand d2 max d3 min L Part No. Part No. 10.415 7.8 1000 505-012-010 500-012-010 10.415 7.8 2000 505-012-020 500-012-020 10.415 7.8 3000 505-012-030 500-012-030 12.415 9.8 1000 505-014-010 500-014-010 12.415 9.8 2000 505-014-020 500-014-020 12.415 9.8 3000 505-014-030 500-014-030 13.905 10.8 1000 505-016-010 500-016-010 13.905 10.8 2000 505-016-020 500-016-020 13.905 10.8 3000 505-016-030 500-016-030 15.905 12.8 1000 505-018-010 500-018-010 15.905 12.8 2000 505-018-020 500-018-020 15.905 12.8 3000 505-018-030 500-018-030 17,905 14,8 1000 505-020-010 500-020-010 17,905 14,8 2000 505-020-020 500-020-020 17,905 14,8 3000 505-020-030 500-020-030 19,394 15,5 1000 505-022-010 500-022-010 19,394 15,5 2000 505-022-020 500-022-020 19,394 15,5 3000 505-022-030 500-022-030 21,394 17,5 1000 505-024-010 500-024-010 21,394 17,5 2000 505-024-020 500-024-020 21,394 17,5 3000 505-024-030 500-024-030 23,394 19,5 1000 505-026-010 500-026-010 23,394 19,5 2000 505-026-020 500-026-020 23,394 19,5 3000 505-026-030 500-026-030 25,394 21,5 1000 505-028-010 500-028-010 25,394 21,5 2000 505-028-020 500-028-020 25,394 21,5 3000 505-028-030 500-028-030 26,882 21,9 1000 505-030-010 500-030-010 26,882 21,9 2000 505-030-020 500-030-020 26,882 21,9 3000 505-030-030 500-030-030 28,882 23,9 1000 505-032-010 500-032-010 28,882 23,9 2000 505-032-020 500-032-020 28,882 23,9 3000 505-032-030 500-032-030 32,882 27,9 1000 505-036-010 500-036-010 32,882 27,9 2000 505-036-020 500-036-020 32,882 27,9 3000 505-036-030 500-036-030 36,375 30,5 1000 505-040-010 500-040-010 36,375 30,5 2000 505-040-020 500-040-020 36,375 30,5 3000 505-040-030 500-040-030 40,375 34,5 1000 505-044-010 500-044-010 40,375 34,5 2000 505-044-020 500-044-020 40,375 34,5 3000 505-044-020 500-044-030 43,868 37,8 1000 505-048-010 500-048-010 43,868 37,8 2000 505-048-020 500-048-020 43,868 37,8 3000 505-048-030 500-048-030 45,868 39,3 1000 505-050-010 500-050-010 45,868 39,3 2000 505-050-020 500-050-020 45,868 39,3 3000 505-050-030 500-050-030 adscrew mercial Range Material Steel Quality En8 (C35) DIN 103 Lead Tolerance 0.1/300mm Straightness 0.3/300mm 10311 • F: 01827 307118 h-trans.co.uk • www.wmh-trans.co.uk Left Hand Right Hand Tr d x p d2 min d2 max d3 min L Part No. Part No. 20 x 4 17,640 17,905 15,18 1000 506-020-010 501-020-010 20 x 4 17,640 17,905 15,18 2000 506-020-020 501-020-020 20 x 4 17,640 17,905 15,18 3000 506-020-030 501-020-030 22 x 5 19,114 19,394 16,04 1000 506-022-010 501-022-010 22 x 5 19,114 19,394 16,04 2000 506-022-020 501-022-020 22 x 5 19,114 19,394 16,04 3000 506-022-030 501-022-030 24 x 5 21,094 21,394 18,02 1000 506-024-010 501-024-010 24 x 5 21,094 21,394 18,02 2000 506-024-020 501-024-020 24 x 5 21,094 21,394 18,02 3000 506-024-030 501-024-030 26 x 5 23,094 23,394 20,02 1000 506-026-010 501-026-010 26 x 5 23,094 23,394 20,02 2000 506-026-020 501-026-020 26 x 5 23,094 23,394 20,02 3000 506-026-030 501-026-030 28 x 5 25,094 25,394 22,02 1000 506-028-010 501-028-010 28 x 5 25,094 25,394 22,02 2000 506-028-020 501-028-020 28 x 5 25,094 25,394 22,02 3000 506-028-030 501-028-030 30 x 6 26,547 26,882 22,46 1000 506-030-010 501-030-010 30 x 6 26,547 26,882 22,46 2000 506-030-020 501-030-020 30 x 6 26,547 26,882 22,46 3000 506-030-030 501-030-030 32 x 6 28,547 28,882 24,46 1000 506-032-010 501-032-010 32 x 6 28,547 28,882 24,46 2000 506-032-020 501-032-020 32 x 6 28,547 28,882 24,46 3000 506-032-030 501-032-030 36 x 6 32,547 32,882 28,46 1000 506-036-010 501-036-010 36 x 6 32,547 32,882 28,46 2000 506-036-020 501-036-020 36 x 6 32,547 32,882 28,46 3000 506-036-030 501-036-030 40 x 7 36,020 36,375 31,43 1000 506-040-010 501-040-010 40 x 7 36,020 36,375 31,43 2000 506-040-020 501-040-020 40 x 7 36,020 36,375 31,43 3000 506-040-030 501-040-030 44 x 7 40,020 40,375 35,43 1000 506-044-010 501-044-010 44 x 7 40,020 40,375 35,43 2000 506-044-020 501-044-020 44 x 7 40,020 40,375 35,43 3000 506-044-030 501-044-030 48 x 8 43,468 43,868 38,37 1000 506-048-010 501-048-010 48 x 8 43,468 43,868 38,37 2000 506-048-020 501-048-020 48 x 8 43,468 43,868 38,37 3000 506-048-030 501-048-030 50 x 8 45,468 45,868 40,37 1000 506-050-010 501-050-010 50 x 8 45,468 45,868 40,37 2000 506-050-020 501-050-020 50 x 8 45,468 45,868 40,37 3000 506-050-030 501-050-030 60 x 9 54,935 55,360 49,33 1000 506-060-010 501-060-010 60 x 9 54,935 55,360 49,33 2000 506-060-020 501-060-020 60 x 9 54,935 55,360 49,33 3000 506-060-030 501-060-030 70 x 10 64,425 64,850 58,32 1000 506-070-010 501-070-010 70 x 10 64,425 64,850 58,32 2000 506-070-020 501-070-020 70 x 10 64,425 64,850 58,32 3000 506-070-030 501-070-030 leadscrew Precision Range Whirled Finish Material Steel Quality En1A (1.0715) DIN 103 Lead Tolerance 0,05/300mm Straightness 0,3/300mm 73 T: 01827 310311 • F: 01827 307118 E: sales@wmh-trans.co.uk • www.wmh-trans.co.uk 37 Shaft Option Description 1 DIN ISO 14 Spline bore input 6 x 11 x 14 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø10mm h7 3x3 P9 keyway NOTE: Example jack shown above with 2 racks and shaft option 3 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 573 Max. Input Torque (Nm) 8 Max. Capacity (kg) 80 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 3.5 Module 1 Tooth Quality 8 h27 Pinion No of Teeth 20 Standard Rack No of Teeth** 923 Theor. Rack Length (mm)** 2900 80 80 RACK LENGTH 26 48 45° M6 x 12 50 14 h7 5x5 KEYWAY 55 25 h6 M8 x 16 Ø6.8 THRU Ø6 H7 x 5 M10 x 10 (FOR GREESE NIPPLE) M10 x 30 (BOTH ENDS) 134 70 55 52 50 20 38 15 30 = = M8 x 16 Ø6.8 THRU M4 x 6 2 3 4 3 2 5 C D 4 6 7 8 A B 541-132-923 WEIGHT: A3 SHEET 1 OF 1 SCALE:1:20 DWG NO. TITLE: REVISION DO NOT SCALE DRAWING MATERIAL: DATE SIGNATURE NAME DEBUR AND BREAK SHARP EDGES FINISH: UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: Q.A MFG APPV'D CHK'D DRAWN * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) TEL: 01827 288122 sales@wmh-trans.co.uk FAX: 01827 253390 www.wmh-trans.co.uk NOTE: Racks move in opposite directions when the input gear is rotated Twin Travelling Rack R3 - 800 kg Capacity Twin Travelling Racks 180 72 RACK LENGTH 180 45° 110 M10 x 20 42 h7 12x8 KEYWAY 60 h6 105 120 M20 x 50 (BOTH ENDS) M12 x 27 Ø10.2 THRU Ø6 H7 x 5 M10 x 10 (FOR GREASE NIPPLE) 253 15 100 105 130 60 120 = 35 99 = M4 x 8 M12 x 27 Ø10.2 THRU 3 2 5 4 6 7 8 REVISION DO NOT SCALE DRAWING DEBUR AND BREAK SHARP EDGES FINISH: UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: Shaft Option Description 1 DIN ISO 14 Spline bore input 8 x 32 x 38 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø35mm h7 10x8 P9 keyway Model 541-332-369 Travel per Input rev (mm) 188.4955 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 191 Max. Input Torque (Nm) 240 Max. Capacity (kg) 800 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 19.1 Module 2.5 Tooth Quality 8 h27 Pinion No of Teeth 24 Standard Rack No of Teeth** 369 Theor. Rack Length (mm)** 2900 NOTE: Example jack shown above with 2 racks and shaft option 3 TEL: 01827 288122 FAX: 01827 253390 * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) NOTE: Racks move in opposite directions when the input gear is rotated NOTE: Example jack shown below with 2 racks and shaft option 3 R1 - 80 kg Capacity Twin Travelling Racks Shaft Option Description 1 DIN ISO 14 Spline bore input 6 x 11 x 14 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø10mm h7 3x3 P9 keyway Model 541-132-923 Travel per Input rev (mm) 62.8318 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 573 Max. Input Torque (Nm) 8 Max. Capacity (kg) 80 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 3.5 Module 1 Tooth Quality 8 h27 Pinion No of Teeth 20 Standard Rack No of Teeth** 923 Theor. Rack Length (mm)** 2900 80 80 RACK LENGTH 26 48 50 14 h7 5x5 KEYWAY 55 25 h6 M8 x 16 Ø6.8 THRU Ø6 H7 x 5 M10 x 10 (FOR GREESE NIPPLE) M10 x 30 (BOTH ENDS) 134 70 55 52 50 20 38 15 30 = = M8 x 16 Ø6.8 THRU M4 x 6 3 2 5 4 6 7 * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) NOTE: Racks move in opposite directions when the input gear is rotated * ETG100 alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) NOTE: Racks move in opposite directions when the input gear is rotated Model 541-332-369 Travel per Input rev (mm) 188.4955 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 191 Max. Input Torque (Nm) 240 Max. Capacity (kg) 800 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 19.1 Module 2.5 Tooth Quality 8 h27 Pinion No of Teeth 24 Standard Rack No of Teeth** 369 Theor. Rack Length (mm)** 2900 Shaft Option Description 1 DIN ISO 14 Spline bore input 8 x 32 x 38 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø35mm h7 10x8 P9 keyway R3 – 800 kg Capacity