40 MTJZ 065 Z-Axis Belt Actuators – Dimensions TEL: 01827 288122 sales@wmh-trans.co.uk FAX: 01827 253390 www.wmh-trans.co.uk 5.0 HOW TO ORDER 3 1 - 2 - AT polyurethane toothed belt with steel tension cords. 3 - Aluminium profile-Hard anodized 4 - Linear Ball Guideway 5 - Drive block with pulley, Motor flange; with built in Magnets 6 - Central lubrication port; both sides 7 - Tension End with integrated belt tensioning system Tension End with integrated belt tensionin system The specifications in order to improve the products in this catalogue are subject to change without notice. MTJZ 65 1000 - - - Size : 40 65 80 110 Absolute Stroke (mm) : (Absolute stroke = Effective stroke + 2 x Safety stroke) Type of drive pulley : 0 : Pulley with through hole 1 : Pulley with journal 10 : Pulley with journal (without Keyway) 2 : Pulley with journal on both sides 20 : Pulley with journal on both sides (without Keyway) MTJZ 110 only available with drive pulley with through hole Series : MTJZ 1 - 0 Clamping element : 0 : Without 1 : With (available only for MTJZ 110) - 1 Number of drive blocks : The stated number specifies the number of drive blocks on one Linear unit 4.025.0 MTJZ 65 LINEAR UNITS DIMENSIONS The specifications in order to improve the products in this catalogue are subject to change without notice. TYPE 0 TYPE 2 TYPE 1 All dimensions in mm; Drawings scales are not equal. For centering ring CR7 For centering ring CR 7 Deep Deep Lubrication nipple DIN 3405D DIN 6885 A DIN 6885 A DIN 6885 A Deep Deep Deep Deep Deep Deep Deep Deep Deep Deep Deep 5,5 20 Journal with or without Keyway. Journal with or without Keyway. Accessories see on page 7.000.0 Accessories see on page 7.000.0 Absolute stroke /2 Absolute stroke /2 Linear Unit doesn’t include any safety stroke. Absolute stroke = Effective stroke + 2 x Safety stroke 4.025.0 MTJZ 65 LINEAR UNITS DIMENSIONS The specifications in order to improve the products in this catalogue are subject to change without notice. TYPE 0 TYPE 2 TYPE 1 All dimensions in mm; Drawings scales are not equal. For centering ring CR7 For centering ring CR 7 Deep Deep Lubrication nipple DIN 3405D DIN 6885 A DIN 6885 A DIN 6885 A Deep Deep Deep Deep Deep Deep Deep Deep Deep Deep Deep 5,5 20 Journal with or without Keyway. Journal with or without Keyway. Accessories see on page 7.000.0 Accessories see on page 7.000.0 Absolute stroke /2 Absolute stroke /2 Linear Unit doesn’t include any safety stroke. Absolute stroke = Effective stroke + 2 x Safety stroke