36 80 80 RACK LENGTH 26 48 45° M6 x 12 50 14 h7 5x5 KEYWAY 55 25 h6 M8 x 16 Ø6.8 THRU Ø6 H7 x 5 M10 x 10 (FOR GREESE NIPPLE) M10 x 30 (BOTH ENDS) 134 70 55 52 50 20 38 15 30 = = M8 x 16 Ø6.8 THRU M4 x 6 3 2 5 4 6 7 TITLE: DO NOT SCALE DRAWING DATE SIGNATURE NAME DEBUR AND BREAK SHARP EDGES FINISH: UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: APPV'D CHK'D DRAWN NOTE: Example jack shown above with 1 rack and shaft option 3 Model 541-131-923 Travel per Input rev (mm) 62.8318 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 573 Max. Input Torque (Nm) 8 Max. Capacity (kg) 80 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 3.5 Module 1 Tooth Quality 8 h27 Pinion No of Teeth 20 Standard Rack No of Teeth** 923 Theor. Rack Length (mm)** 2900 R1 - 80 kg Capacity Single Travelling Rack Shaft Option Description 1 DIN ISO 14 Spline bore input 6 x 11 x 14 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø10mm h7 3x3 P9 keyway TEL: 01827 288122 sales@wmh-trans.co.uk FAX: 01827 253390 www.wmh-trans.co.uk * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request)