39 R2 - 200 kg Capacity Twin Travelling Racks RACK LENGTH 110 47 110 45° 72 M8 x 12 174 80 60 15 45 72 18 61 = = M4 x 8 M10 x 20 Ø8.5 THRU 72 60 32 h6 25 h7 8x7 KEYWAY M12 x 35 (BOTH ENDS) M10 x 20 Ø8.5 THRU Ø6 H7 x 3 M10 x 10 (FOR GREESE NIPPLE) 3 2 5 4 6 7 TITLE: DO NOT SCALE DATE SIGNATURE NAME DEBUR AND BREAK SHARP EDGES FINISH: UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: DRAWN Shaft Option Description 1 DIN ISO 14 Spline bore input 6 x 16 x 20 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø20mm h7 6x6 P9 keyway Model 541-232-369 Travel per Input rev (mm) 125.6637 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 286 Max. Input Torque (Nm) 40 Max. Capacity (kg) 200 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 5.5 Module 2.5 Tooth Quality 8 h27 Pinion No of Teeth 16 Standard Rack No of Teeth** 369 Theor. Rack Length (mm)** 2900 NOTE: Example jack shown above with 2 racks and shaft option 3 TEL: 01827 288122 sales@wmh-trans.co.uk FAX: 01827 253390 www.wmh-trans.co.uk * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) NOTE: Racks move in opposite directions when the input gear is rotated