40 R3 - 800 kg Capacity Single Travelling Rack 180 72 RACK LENGTH 180 45° 110 M10 x 20 42 h7 12x8 KEYWAY 60 h6 105 120 M20 x 50 (BOTH ENDS) M12 x 27 Ø10.2 THRU Ø6 H7 x 5 M10 x 10 (FOR GREASE NIPPLE) 253 15 100 105 130 60 120 = 35 99 = M4 x 8 M12 x 27 Ø10.2 THRU 3 2 5 4 6 7 TITLE: DO NOT SCALE DRAWING DATE SIGNATURE NAME DEBUR AND BREAK SHARP EDGES FINISH: UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: APPV'D CHK'D DRAWN Shaft Option Description 1 DIN ISO 14 Spline bore input 8 x 32 x 38 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø35mm h7 10x8 P9 keyway TEL: 01827 288122 sales@wmh-trans.co.uk FAX: 01827 253390 www.wmh-trans.co.uk * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) NOTE: Example jack shown above with 1 rack and shaft option 3 Model 541-331-369 Travel per Input rev (mm) 188.4955 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 191 Max. Input Torque (Nm) 240 Max. Capacity (kg) 800 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 19.1 Module 2.5 Tooth Quality 8 h27 Pinion No of Teeth 24 Standard Rack No of Teeth** 369 Theor. Rack Length (mm)** 2900