Round Type Racks High Tensile Alloy Steel Size Module Ød h6 M x t kg / m Pitch R1 1.0 25 M10 x 30 3.5 3.1416 R2 2.5 32 M12 x 35 5.5 7.8540 R3 2.5 60 M20 x 50 19.1 7.8540 42 AS WELL AS OUR RANGE OF STANDARD PRODUCTS WE CAN ALSO OFFER IN HOUSING MACHINING AND CUSTOM MODIFICATIONS ON REQUEST – PLEASE CONTACT OUR SALES TEAM TEL: 01827 288122 sales@wmh-trans.co.uk FAX: 01827 253390 www.wmh-trans.co.uk WMH rack jacks feature specially made round type racks. They have increased section diameter and tooth width over standard round racks as well as squared-off tooth profiles to prevent rotation within the jack body. The racks are also made from high tensile ETG100 alloy steel to increase the capacity of the jacks. WMH rack jacks require protection against side and transverse loads as they can only transfer tensile and compressive forces. This support is usually done via the use of linear guides or ball bushes running parallel with the rack travel. Please contact our sales team for information on the options available from stock.