b'LinearMotion LinearMotionSpecification - LAS3 LAS4 SeriesLinear ActuatorThrust Pulling HoldingSpeed (mm/ DutyCurrent max. (A) OpticalPotentiometerModel max. max. max. s) Standard strokecycle Sensor Resolution(N) (N) (N) Load=Max./ (mm) : S % 12VDC 24VDC Resolution (Ohm/mm) Screw typeACMELoad=0 (mm/pulse)Weight* 1.36kgLAS3-1 1200 1200 800 8 12 50 100 150 200 250 10 6 2.5 0.3175 21 Protection IP54LAS3-2 600 600 300 16 25 50 100 150 200 250 10 6 3 0.635 10.5CompatibleCompatible with all controllersLAS3-1/ -2 controller (*Notice the type of connector: Audio/DIN 24(12) VDC Motor 4pin)3025 Working temp. +5oC~40oCSpeed (mm/s)2015 LAS3-110 LAS3-2 Position feedback specifications (Hall Sensor)5 Supply voltage 24VDC 12VDC 5VDC00 200 400 600 800 1000 1200 Output High level 24VDC High level 12VDC TTLLoad (N) Low level 0.2V/10mA sinkLow level 0.2V/10mA sink(NPN) (NPN)LAS3-1/ -224 VDC Motor3.02.5Current (Amp) Current (Amp) 5 2.01.5 LAS3-11.0 LAS3-2 * Stroke length 200mm 0.5 * Option: (1) IP65 0 (2) Hall sensor (RL=S+226)0 200 400 600 800 1000 1200Load (N)**Note: The test results are obtained by using the 24VDC power supply.LAS3-1/ -212 VDC Motor654RL=S+222.53 LAS3-1 Stroke300LAS3-2 RL=S+272.52 Stroke>3001 RL:Retracted length0 0 200 400 600 800 1000 1200 S:Stroke lengthLoad (N)**Note: The test results are obtained by using the 12VDC power supply.MOTOR CABLE MOTOR CABLE LENGTH=1M Ordering Information MOTOR CABLE DIAMETER=5 LAS3 1 1 200 24 G E 2-601 18.8 29.515.5 45Model number Special models according tothe customers requirement0: Without internal limit switches (Ignore this part of the serial 1: Basic model complete number if not available)with internal limit switches Color 48.5(27.5) 5Stroke length B: Black 157RL9.4 G: Gray (Standard) 45 VoltageT: 01827 288122F: 01827 253391 T: 01827 288122F: 01827 253391 LASE: sales@wmh-trans.co.ukwww.wmh-trans.co.uk E: sales@wmh-trans.co.ukwww.wmh-trans.co.uk122 123'